The purpose of the isolating amplifier Theta 60I is to electrically insolate input and output signals, respectively to amplify and / or change the signal level or type (current or voltage) of the input signals.

Theta 60I隔離放大器的目的是對輸入信號和輸出信號進行電化處理，分別放大和/或改變輸入信號的信號電平或類型(電流或電壓)。

產(chǎn)品資料：

Theta60I-manual

Features

·         252 standard input and output combinations selected by soldered jumpers

·         User-specific input and / or output ranges

·         Isolating amplifier with one input one or two electrically insulated outputs.

·         Power supply 24…60VDC/AC or 85…230VDC / AC

·         Electric Isolation between input, output and power supply, prevents falsified measurement due to spurious potentials.

·         Flexibillity provided by more than 250 different input and output combinations selected by simply positioning soldered jumpers, help in reduced stocking.

·         Processes unipolar/ bipolar and live zero signals provision for raising burden and signal conversion Green LED signals indicates device in operating condition.

·         High Electrical Insulation between input and output – 2.3KV, and power supply versus all Other Circuits-3.7 KV

·         Provision for either snapping the isolating amplifier on to top-hat rails or securing it with screw to a wall or panel.

特性

·         252標準輸入和由焊接跳線選擇的輸出組合。

·         用戶特定的輸入和/或輸出范圍。

·         用一個或兩個電絕緣輸出隔離放大器。

·         電源直流/交流或24…85…230 vdc /交流

·         輸入、輸出和電源之間的電氣隔離，防止由于虛假的電勢而導致虛假的測量。

·         由250多個不同的輸入和輸出組合提供的靈活的組合，通過簡單的定位焊接跳線，幫助減少庫存。

·         處理單極/雙極和實時零信號，用于提高負載和信號轉(zhuǎn)換綠色LED信號表明設備處于運行狀態(tài)。

·         輸入和輸出之間的高電氣絕緣- 2。3kv，電源與所有其他電路之間-3.7 KV。

·         規(guī)定將隔離放大器安裝到頂部的軌道上，或用螺絲固定在墻上或面板上。