P30U transducer is designed to convert temperature, resistance, standard voltage and current signals into a standard DC voltage or DC current signal.

The output signal is galvanically isolated from the input signal and the power supply.
P30U has programmable measurement and additional functions.
Programming parameters can be realized with the use of buttons, via RS-485 interface and free e-con software or Ethernet or any web browsers via Ethernet interface.The device fulfills the requirements of III installation’s category for the products designed to industrial application – see the video presenting, how important it is.

P30U轉換器設計用于將溫度、電阻、標準電壓和電流信號轉換為標準直流電壓或直流電流信號。

輸出信號從輸入信號和電源中進行電流隔離。

P30U具有可編程測量和附加功能。

編程參數可以通過使用按鈕實現，通過RS-485接口和免費的e-con軟件或以太網或任何網絡瀏覽器通過以太網接口實現。該設備滿足了為工業應用設計的產品的III安裝的要求——看視頻展示，它有多重要。

P30U-datasheet

P30U-manual

Features of P30U parameters and functions:

·         input: programmable

·         thermocouples, resistance thermometers,

·         0…4/20 mA, +/- 20mA

·          -5…20mV, +/- 75mV; +/-200mV

·         400, 2000, 5500 ohm

·         RS485 Master or Slave

·         output: programmable

·         analog (current or voltage)

·         1 or 2 x relays

·         digital RS-485

·         display: LCD 2 x 8 characters with backlit,

·         supply: 85..253 V a.c./d.c. or 20…40 V a.c./20…60 V d.c.

·         conversion of the measured value into any output signal on the basis of the individual liner characteristics,

·         conversion of the measured value by means of one of five implemented mathematical functions,

·         conversion of the measured value on the basis of 21-point individual characteristics,

·         additional 24V DC 30mA power supply switched on/off like an alarm (option)

·         indication of exceeding the alarm values,

·         programmable alarm and analogue outputs with a reaction to the selected input value (main input or RTC clock),

·         real time clock with a clock power supply backup function in case of a transducer power supply loss,

·         recording the signal input in programmed time periods in the internal memory and on SD/SDHC card (option),

·         internal memory with the capacity of 534336 records,

·         automatic decimal point setting,

·         preview of configured parameters,

·         access to parameters locked by a password,

·         programming the measurement averaging time.

P30U參數及功能特點:

?輸入:可編程

?熱電偶、電阻溫度計

?4/20 0…mA,+ / - 20 mA

?-5…20mV, +/- 75mV; +/-200mV

?400,2000,5500歐姆。

?RS 485主動和從動裝置。

?輸出:可編程

?模擬(電流或電壓)

?1或2個x繼電器。

?數字RS - 485

?顯示:LCD 2 x8字符，背光，

?電源:85 . .253 V交流/直流電。或20…40 V交流。/ 20…60 V。

?根據單個襯墊特性將測量值轉換成任何輸出信號，

?通過五個實現的數學函數中的一個來轉換測量值，

?基于21點個體特征的測量值的轉換，

?額外24V直流30mA電源開關，如報警(選項)

?超過報警值的指示，

?可編程報警和模擬輸出，對所選輸入值(主輸入或RTC時鐘)作出反應，

?在傳感器供電損耗情況下，實時時鐘具有時鐘供電備份功能，

?在內部內存和SD/SDHC卡(選項)中記錄編程時間內的信號輸入，

?內存容量為534336格記錄，

?自動小數點設置，

?配置參數預覽，

?訪問被密碼鎖定的參數，

?規劃測量平均時間。